Counter Flow Cooling Tower Fill with a 19mm pitch. The larger sheet spacing is suitable for water quality slightly less than ideal.

RF1900 is used in counterflow or crossflow cooling tower applications and is available in glued blocks 305mm wide x 305mm high, and either 1830mm or 2440mm long.

RF1900 can also be cut to length to your specific requirements, or supplied as loose sheets.

Counter Flow Cooling Tower Fill improve water distribution by splitting the water stream as it descends through the fill pack. The CF1900 MA splits the water stream 8 times in a 12" (305 mm) vertical path. High thermal performance (high KaV/L) and low pressure drop are simultaneously achieved through engineered flute/microstructure design and the highest manufacturing standards.

Cooling tower Pvc Infill Technical Data:

Surface area: 45ft2/ft3(157.5m2/m3)

SHEET SPACING:19 mm

Flute angle: 30°

Sheets per ft.: 16

Media pack sizes(Depth, Width, Length):

Minimum: D12 in(305mm), W 6 in(153mm), L: 1 ft (305mm)

Maximum: D24 in(610mm), W 24 in(610mm), L: 10 ft (3050mm)

Standard: D12 in(305mm) or 24 in(610mm), W 12 in(305mm) or 24 in(610mm), L: 4 ft (1220mm), 6 ft(1829mm), 8 ft(2439mm) or 10 ft(3048mm)